STA-BIL 303 Marine & Recreation Fabric Guard

Resist water, even when you're on the water. 303 Marine & Recreation Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil-based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and even outerwear. Simply apply to clean, dry outdoor fabrics to restore lost water repellency and increase stain protection. For best results, clean fabrics using 303 Multi-Surface Cleaner. Usage Directions: Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303 Fabric Guard. Spray until evenly wet, overlapping sprayed areas. NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 6-12 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 75-100 sq. ft. (7-9.3 m²) per 16 fl. oz. (473 ml) on lightweight fabrics; 40-75 sq. ft. (3.7-7 m²) on heavier fabrics depending on material and application method. Uses: Bimini tops and sailcloth Boat covers Fabric awnings Jet ski covers Rain gear Sports apparel and gear